Troubleshooting; Specifications - Panasonic ER-CTW1 Operating Instructions Manual

Removing and mounting
the blade
To remove the blade, hold the head, place your thumb
against the blades and then push them away from the head.
(Fig. 7‑1)
To mount the blade, fit the mounting hook (d) into the
blade mounting on the head (c) and then push in until
you hear a click. (Fig. 7‑2)
Replacement parts
Blade: once every three years
Replacement part is available at your dealer or Service Centre.
Blade WER9605
Lubrication oil WES003P
Lubrication
• Apply the lubrication oil to the blade before and after each use.
1
Remove the blade.
2
Apply a drop of the lubrication oil to each indicated point.
(Fig. 8)
3
Attach the blade to the head, turn on the power and
allow it to run for approximately 5 seconds.
10

Troubleshooting

Problem
The appliance has
become blunt.
Operating time is short.
Appliance stopped
functioning.
Makes a loud sound.
If the problems still cannot be solved, contact your dealer or a
service centre authorized by Panasonic for repair.

Specifications

Airborne Acoustical Noise
This product is intended for household use only.
Action
Until problems are solved, please
follow each procedure as follows;
1. Charge the appliance.
2. Clean the blade and apply
lubrication oil.
(See pages 9 and 10.)
3. Replace the blade.
(See this page.)
Clean the blade and apply
lubrication oil. (See page 9.)
Confirm that the blade is properly
attached.
66 (dB (A) re 1 pW)