Panasonic 3000 Operating Instructions Manual page 56

PROGRAMMING YOUR MACHINE
Customizing Your Machine
No. Parameter
088 LINE SELECTION
(See Note 4)
089 LIST OUTPUT TRAY
095 DUPLEX PRINT
097 SPECIAL TRAY
No. 1 - 3
099 MEMORY SIZE
(Flash Memory)
140 LAN RELAY XMT
REQUEST
141 LAN XMT REDUCTION
142 RELAY XMT
(a.k.a. LAN RELAY
STATION on UF-770i)
143 RELAY XMT REPORT
144 EMAIL CHARACTER
145 SENDER SELECTION
146 POP TIMER
147 AUTO POP RCV
148 DELETE POP RCV
56
Setting
Number
*1
2
3
*1
2
3
*1
2
*1
2
3
4
5
-
*1
2
*1
2
1
*2
1
*2
3
1
SET
*2
*1
2
--
3
1
*2
1
EMAIL
*2
Setting
Auto Setting the home position for the Telephone Line selection.
Auto : Selects the available telephone line for transmission
Line 1
automatically.
Line 1: Selects this as the default telephone line, unless manually
selecting an alternate phone line.
Line 2
Line 2: Selects this as the default telephone line, unless manually
selecting an alternate phone line.
Inner 1 Selecting the Output Tray home position for List printout.
Inner 2
Inner 1 : The List printout exits to the Bottom Output Tray.
Inner 2 : The List printout exits to the Upper Output Tray (Blue).
Outer
Invalid Selecting whether the machine performs duplex print.
Valid
None Select up to 3 Special Trays that will not be used for printing
received faxes (4-Tray configuration). One Tray must always be
Tray 1
available for receiving faxes.
(You can specify one Tray (1 ~ 4) for each selection No. 1, No. 2
Tray 2
and/or No. 3)
Tray 3
Tray 4
- Displays the amount of base and optional memory installed.
(Base Memory + Optional Memory)
Invalid Selecting whether the machine performs LAN Relay XMT
Request.
Valid
Selecting whether to automatically reduce from LEDGER / B4 to
Invalid
A4, when LEDGER / B4 documents are transmitted via LAN.
Invalid : No reduction
Valid
Valid : Automatic reduction from LEDGER / B4 to A4
Invalid Selecting whether the machine accepts and performs G3 relayed
transmission. (Relay Station Functions)
Valid
Setting how the COMM. Journal for relayed transmission is sent to
Off
the originator.
Always
Off : Don't send.
Always : Always send.
Inc. Only
Inc. Only: Send only if communication has failed.
Japanese Selecting the Character Set when receiving or sending email text.
English
Invalid Selecting a pre-programmed sender's name and email address
before each transmission. (See page 83)
Valid
0 to 60 min. Setting the time interval for the machine to check for email on the
POP Server.
*3 min.
(0 = Does not check the POP Server for email. )
Invalid Selecting whether the machine automatically downloads an email
from the POP Server.
Valid
Invalid Selecting whether the email will be deleted automatically after
retrieval from the POP Server.
Valid
Comments