Panasonic PV-DF2002 Service Manual page 5

Hide thumbs Also See for PV-DF2002:

5.1.2 SELF-DIAGNOSTIC TEST FUNCTION

FOR DVD

TOP PREVIOUS NEXT

This unit has a Self-Diagnostic function which detects a problem or malfunction within the unit and

displays its corresponding Error code on TV Screen.

Note:

If, after approx. 30 seconds, a unit set to DVD mode automatically switches to VCR mode, there is

likely a problem with the DVD Decoder C.B.A. (IC8000, IC8100, IC8200, etc.)

5.1.2.1 How to enter DVD Self-Diagnostic mode

1. Insert a DVD disc into the DVD Unit.

2. Set the unit to DVD mode. Then, press STOP button to stop playback.

Note:

Do not let a DVD play during DVD Self-Diagnostic mode.

3. Press and hold STOP/EJECT, PLAY/REPEAT, and VOL- buttons of VCR operation panel of

the unit together for over 5 seconds with no cassette inserted. The adjustment overlay will

appear on the TV screen.

4. Press DISPLAY key on the remote control to enter DVD Self-Diagnostic mode.

5. Press "1" key on the remote control. The DVD Self-Diagnostic Test function will start

automatically.

Fig. 2-1

Fig. 2-2

Fig. 2-3

http://servis-manual.com/

Table of Contents