Technical Specifications - Silvercrest SSM 1000 A2 Operating Instructions Manual

Fault
• Is the device still pres-
Pressure indica-
• Switch off device, al-
tor 19 does not
move down-
wards.
• Is the device still pres-
Lid 5 will not
open.
• Is the pressure indica-
• Is the lid 5 not proper-
Program does
not start.
Lid is shown in Is the lid 5 not closed, or
the display 29 not open in the case of
and an audio the searing program
signal sounds. (Sear/Sauté 41)?
Error message Overheating: allow the
E3 appears in device to cool down.
the display 29. Check that there is
enough liquid in the
pot 7. Start the process
again.
The dis- Contact the Service Cen-
play 29 shows tre.
another error
message (E and
a number).
Possible causes /
Actions
surised?
low to cool, check that
the sealing pressure
indicator 19 is clean
and moves freely.
surised? Then the lid 5
cannot be opened
(safety mechanism).
tor 19 stuck?
ly closed? Is steam es-
caping?
16. Technical
specifications
Model: SSM 1000 A2
Mains voltage: 220 – 240 V ~ 50 – 60 Hz
Protection
class: I
Power rating: 1000 W
Working
pressure: 70 kPa
Maximum
permitted
pressure: 120 kPa
Filling vol- -
umes: -
-
min. 250 ml
max 4 litres
Rice / food
that expands:
max. 3 litres
GB
73