Connectivity; Cloud Services; Accounts - Bosch FLEXIDOME panoramic 5100i User Manual

FLEXIDOME panoramic 5100i | FLEXIDOME
panoramic 5100i IR
Show alarm outputs
Alarm outputs are shown next to the video image as icons along with their assigned names. If
an output is switched, the icon changes color.
Notice!
i
The functions listed below are currently not supported by the device.
Allow snapshots
Specify whether the icon for saving individual images should be displayed below the live
image. Individual images can only be saved if this icon is visible.
Allow local recording
Specify whether the icon for saving video sequences locally should be displayed below the live
image. Video sequences can only be saved locally on your hard disk if this icon is visible.
Path for JPEG and video files
Enter the path for the storage location of individual images and video sequences saved from
the Live page.
Video file format
Select a file format for the live page display. The MP4 format does not include metadata.
Click Set to apply the changes.
4.3

Connectivity

4.3.1

Cloud services

Remote Portal
Operation
The operation mode determines how the camera communicates with the Remote Portal.
–
–
Connectivity state
This field indicates the device's connectivity state with Remote Portal.
–
Note: The Visit Remote Portal button will become active.
–
Note: The Register button will become active only if you have not registered the device to the
Remote Portal.
4.3.2

Accounts

Four separate accounts can be defined for posting and recording export.
Type
Select either FTP or Dropbox for the account type.
Before using a Dropbox account ensure that the time settings of the device have been
correctly synchronized.
Account name
Enter an account name to be shown as the target name.
Bosch Security Systems B.V.
Select On to poll the server constantly.
Select Off to block polling.
If the device is registered and the operation mode is set to On, the state will indicate that
the device is Connected (to the cloud service).
If the device is not registered or the operation mode is set to Off, the state will indicate
that the device is Not available.
User manual
Configuration | en
2022-01 | V01 | F.01U.385.628
19