Panasonic BB-HCM381A Service Manual page 45

2. Press the [Iris] button.
- Adjustment completes with no error Displays "Adjustment OK"
- Adjustment completes with no error Displays "Adjustment NG"
3. If "Iris Adjust NG" is displayed, see SECTION 12.4&12.5 TROUBLESHOOTING.
2. Zoom Tracking Adjustment
Equipment
- Focus Pattern Chart
- Collimator
- Light Box
Procedure
1. Place a ND filter in the HP light box.
2. Attach the focus pattern chart to the collimator.
3. Adjust the set's lens at the same height as the HP light box.
4. With keeping the end of the set's lens inserting into the Collimator, insert the focus chart side of the
collimator into the HP light box.
5. Connect the Set from PC through LAN to output image.
6. Set the zoom position to Telephoto End and adjust the position so that the Focus Pattern Chart is
displayed in the full screen.
7. Press the [Tracking] button.
- Adjustment completes with no error Displays "Adjustment OK"
- Adjustment completes with no error Displays "Adjustment NG"
8. If "Tracking Adjust NG" is displayed, see SECTION 12.4&12.5 TROUBLESHOOTING.
3. Auto Adjustment
Equipment
- Focus Pattern Chart
- Collimator
- Light Box
Procedure
1. Set up the HP light box, collimator and the set the same way as 2. Zoom Tracking.
2. Connect the Set from PC through LAN to output image.
3. Set the zoom position to Telephoto terminal and adjust the position so that the Focus Pattern Chart is
display in the full screen.
4. Press the [Auto] button.
- Adjustment completes with no error Displays "Adjustment OK"
45