Table of Contents
Advertisement
This teletext alarm detecting feature of the DSR-1000eZ is compatible with the following styles of
Multiplexers:
Kalatel
Philips
Robot
Pelco
Sanyo
Philips REO
ATV
ATV QSP
Vista VLM
QSI 1700
Diebold
Connecting to Dedicated Micros (DM)
When connecting to a Dedicated Micros multiplexer:
It is necessary to connect the alarm output of the Mux to the alarm input of the DSR-1000eZ (as
you would do when connecting the alarm input on standard time-lapse VCR).
It is necessary to configure the Main Menu
It is necessary to configure the Main Menu
To configure the alarm settings:
1. Use the Shuttle to navigate among the fields.
2. Use the Jog to change the values of the highlighted
fields.
3. To Save the changes and Exit the menu: Use the
Jog to select [OK], then press the Enter button.
4. To Exit the menu without making changes: Use the
Jog to select [CANCEL], then press the Enter button.
4.3 Main Menu
This menu allows the user to
program a timed-recorded
event. Use this menu to
specify:
The date, or days on
which the recording
will occur.
The start and stop
time.
The record speed.
The record quality.
Whether the event is
enabled.
0150-0238A
--OR--
Timer Settings
DATE
START
31
16:45
Sat
07:55
Mon-Fri
09:56
Sat-Sun
14:23
Mon-Sun
02:23
--
--:--
EDIT Mode
4-3
Alarms
Hardwire Alarm as Enabled.
Alarms
Teletext Alarm as Disable.
Hardwire Alarm :
Teletext Alarm :
Alarm Buzzer
[CANCEL]
STOP
SPD(pps)
17:05
20
08:10
10
11:05
60
14:50
60
03:34
20
--:--
--
[OK]
Hit "ENTER" To Toggle EDIT Mode
Alarm Menu
Enable
Disable
:
Enable
[OK]
QUALITY
ON/OFF
High
On
Med
Off
Low
On
High
On
Med
Off
--
--
Calibur DSR-1000eZ
Advertisement
Table of Contents
