In accordance with the European Directive 11. Do not use a battery pack or tool that is damaged or on waste electrical and electronic equipment modified. Damaged or modified batteries may exhibit and on accumulators and batteries and unpredictable behaviour resulting in fire, explosion or waste accumulators and batteries, as risk of injury.
Page 6
A battery short can cause a large current ● Replace only with the same or equivalent type. ● Only use genuine Makita batteries. Use of non- flow, overheating, possible burns and even a breakdown. genuine Makita batteries, or batteries that have 6.
OPERATING TIME * The suitable battery packs for this radio listed as the following table. * The following table indicates the operating time on a single charge. AT SPEAKERS OUTPUT Battery cartridge voltage = 100mW Unit: Hour (Approximately) Battery capacity LXT (18V) Radio/AUX Bluetooth play...
the remaining battery capacity. The indicator lamps light INSTALLATION AND POWER up for few seconds. SUPPLY ● XGT/LXT battery cartridge CAUTION: Indicator or lamps ● Be careful not to pinch your fingers when opening Remaining capacity and closing the battery cover. ●...
● Use the AC power adaptor supplied with the product or specified by Makita only. LISTENING TO THE RADIO ● Do not hold the power supply cable and plug by your mouth.
● If AM/FM is flashing on the screen, it allows you to b. Program type Displays the type of station being tune the stations manually (see the section of “Manual listened to such as Pop, Classic, tuning – AM/FM” for more detail). News, etc.
2. Rotate the Tuning control knob until “CLOCK xxH” the setting. The clock time of the radio will set up appears on the display and press the Tuning control automatically according to the RDS data received. knob to enter the setting. You will see the time format Note: begins to flash.
The alarm beep will sound shorter every 15 seconds 2. Keep holding the Power button and the Sleep Timer for one minute followed by one minute silence before options will start switching on the display. Stop until the repeating the cycle. desired Sleep Timer setting appears on the display.
Press the Tuning control knob to enter the device again to the radio. “TREBLE” setting. ● If “MR005G” shows in your Bluetooth device list but 5. Rotate the Tuning control knob to select your required your device cannot connect with it, please delete the treble level.
Page 14
You can plays the sound on the left channel for stereo playback use the TWS function to connect it to a second MR005G between the speakers. and play your music through two speakers.
mode. When the connection is successful, the display MICROPHONE SOCKET will be shown “PARENT” (the master speaker) on the first speaker and the other displays are all shown A 6.3mm microphone socket is provided at the front of “CHILD” (the secondary speaker). The EQ setting will your radio to connect to the microphone.
SPECIFICATIONS Power requirements DC 12V 2.5A, center pin AC power adaptor positive UM-3 (AA size) x 2 for Battery back up Slide battery: 10.8V - 36V FM 87.50-108 MHz (0.05MHz/step) Frequency coverage AM (MW) 522-1,710 kHz (9kHz/step) ® Bluetooth ® (The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.)