Table of Contents
Advertisement
ENGLISH
5
To secure the cabinet, fasten the two
locking screws (C) directly into the plastic
41 mm
top through the drop-shaped holes.
Type 3
Place the assembly brackets (D) along
the rear edge of the appliance and mark
the positions of the holes.
Remove the brackets and drill two 3,5
mm holes where marked.
Attach the double-sided tapes (E) to the
assembly brackets (D). Fasten the brack‐
ets to the top of the appliance in the front.
Refer to the measurements on the pic‐
417mm
4mm
ture.
Turn the cupboard and place it on the ap‐
4mm
pliance, to let the door open in the de‐
sired direction.
To secure the cabinet, screw the two
locking screws (C) into the drilled holes.
Advertisement
Table of Contents
