Page 1
ORDER NO. ACED060223C8 AUTOMOTIVE AFTERMARKET CQ-C1312NW WMA MP3 CD Player/Receiver SPECIFICATIONS Specifications* General Power Supply DC 12V (11V - 16V), Test Voltage 14.4V Negative Ground Current Consumption Less than 2.2A (CD mode ; 0.5W 4-channels) Maximum Power Output 50W×4ch (at 1kHz ; Volume...
Usable Sensitivity 32dB/ V (S/N 20dB) CD Player Sampling Frequency 8 Times Oversampling DA Converter 1bit DAC System Pick-Up Type Astigma 3-beam Light Source Semiconductor Laser Wave Length 790nm Frequency Response 20Hz to 20kHz (±1dB) Signal to Noise Ratio 96dB Total Harmonic Distortion 0.01% (1kHz) Wow and Flutter...
- Pb free solder will tend to splash when heated too high (about 1100°F/ 600°C) - This lead free solder will be used for the products after serial No. 1,000,001. 2. LASER PRODUCTS 3. FEATUERS - Digital servo for reliable playback. - PLL (Phase Locked Loop) synthesized tuning.
Your product is designed and manufactured to ensure a minimum of maintenance. Use a dry, a soft cloth for routine exterior cleaning. Never use benzine, thinner or other solvents. 6. NOTES [RADIO BLOCK] Do not align the AM/FM package block. When the package block is necessary, it will be supplied already aligned at the factory.
9. TERMINALS DESCRIPTION 9.1. Main Block IC601 : YESAM281 Port Description FM AM CD 1 (NC) 2 VSM Radio signal strength 3 SD/ST Radio station 0.3 0 0.8 detect 4 AVSS Ground 5 SCL Audio control O 4.9 4.9 4.9 serial clock 6 SDA Audio control data...
Page 7
Port Description FM AM CD 33 VSS1 Ground 34 RDS DATA RDS data 35 S-LED LED control 36 LCD CE LCD chip enable 37 LCD 5V Display 5V control 38 EJ ILL (NC) 39 OP/CL (NC) 40 (NC) 41 EJECT (NC) 42 ROTARY 1 Rotary encoder 4.8 4.8 4.8 input 1...
Page 8
(NC) Port Description FM AM CD 67 VSS0 Ground 68 VDD1 +5V power supply 4.8 4.8 4.8 69 X2 Crystal oscillator 2.9 2.9 2.9 70 X1 Crystal oscillator 2.3 2.3 2.3 71 TEST (TEST terminal) 72 XT2 Crystal oscillator 2.7 2.7 2.7 73 XT1 Crystal oscillator 74 VDD0...
Page 9
Port Descriptions CVSS1 GND CVSS2 GND DVDD1 I/O system (3.3V) power supply Address bus of FLASH ROM Address bus of FLASH ROM 10 A14 11 A15 12 / CORE CPU system (1.6V) CVDD1 power supply 14 DVSS1 GND 15 CVSS3 GND 16 / I/O system (3.3V) power CVDD2...
Page 10
Port Descriptions 40 DVSS2 GND 41 CLK C AUDIO bit clock input 42 SCK Clock input 43 LRCK AUDIO L/R identifying signal input 44 CDFS Serial frame sink signal input 45 DATA AUDIO serial data input 47 SI Serial data input 48 CLK M AUDIO bit clock output 49 SCK...
Port Descriptions 110 A20 111 CVSS9 GND 112 DVDD5 I/O system (3.3V) power supply 113 D6 Data bus of FLASH ROM 114 D7 115 D8 116 D9 117 D10 118 D11 Data bus of FLASH ROM 119 D12 120 STAT Status signal input 121 D13 Data path of FLASH ROM...
IC404 : YESAM178 11. REPLACEMENT PARTS LIST Notes : 1. Be sure to make your orders of replacement parts according to this list. 2. Important safety notice: Components, identified by mark have special characteristics important for safety. When replacing any of these components, use only manufacturer's specified parts.
Page 18
Ref. No. Part No. Part Name & Description Remarks [7210-02-11] MAIN BLOCK IC's and TRANSISTORs IC201 YESAM293 IC271 C1EA00000041 IC401 C1BB00001045 IC501 YESAM283 IC601 YESAM281 IC681 YESAM273 IC710 YESAM277 IC740 YESAM269 IC750 YESAM267 IC755 YESAM263 PA051 YESAP403 Tuner Pack Q052 YESAN082 Transistor Q054...
13. CD PLAYER PARTS LIST Notes : 1. Be sure to make your orders of replacement parts according to this list. 2. Important safety notice: Components, identified by mark have special characteristics important for safety. When replacing any of these components, use only manufacturer's specified parts.
Page 30
3. Location keys in the remarks column indicates the general location of the parts shown in the exploded drawing, as in a road map. 4. The marking (RTL) indicates that Retention Time is limited for this item. After the discontinuation of assembly in production, the item will continue to be available for a specific period of time.
Page 31
Ref. No. Part No. Part Name & Description Remarks C124 YESCC187 Ceramic, 0.1 F 25WV C125 YESCC187 Ceramic, 0.1 F 25WV C151 YESCC388 Electrolytic, 100 F 16WV C154 YESCC390 Electrolytic, 220 F 10WV C204 YESCC183 Ceramic, 0.0022 F 50WV C205 YESCC183 Ceramic, 0.0022 F 50WV...
Page 32
Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks R207 ERJ3GEY0R00V Chip, 0 1/4W C422 YESCC187 Ceramic, 0.1 F 25WV R208 YESRG233 Chip, 47k 1/10W C426 YESCC187 Ceramic, 0.1 F 25WV R209 ERJ3GEY0R00V Chip, 0 1/4W...
Page 33
Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks YERFX007001 Clamper Ass'y R437 YESRG221 Chip, 100 1/10W YESAK01041 Spindle Motor Ass'y R438 YESRG221 Chip, 100 1/10W YERFX046002 Clamper Arm R439 YESRG221 YERFX005001 Changer Gear Spring Chip, 100...
Page 48
CQ-C1312NW 16.2. Display Block 7210-05-11 D901,D903–D905,D908–D917 YESAD125 D902 D937 YESAD125 Q902 Q901 YESAD143 B1GDCFJJ0008 YESAN083 D931 YESAD147 D920 YESAD145 The following symbols are shown on the schematic diagram.
Page 49
DV DD4 M LD TP111 BD R1 BD X1 M LD BFSR 1 BFSX1 STAT TP112 CLK2 STAT TP303 RC H R435 R436 TP301 GN D(A) 3.3V 3.3V C406 C407 0.1u 0.1u C405 0.1u RA 403 R406 CQ-C1312NW CD DECK...