Remote Buttons; Component Buttons; Vcr Function Buttons - GE VG2042 User Manual

VCR BASICS

Remote Buttons

The remote control is capable of controlling more than just
your VCR, and if you have compatible GE, RCA, or ProScan
components, you may be able to control them without even
having to program the remote.

Component Buttons

POWER Turns off VCR when remote is set to control the VCR.
Also turns some compatible components on and off.
SAT CABLE Turns on a compatible GE, RCA, or ProScan digital
satellite receiver and sets the remote to control the receiver. Can
be programmed to control different brands of digital satellite
receivers. Used with the POWER button to turn on a compatible
cable box (if programmed) and sets the remote to control the
cable box.
TV Turns on a compatible GE, RCA, or ProScan TV and sets the
remote to control the TV. Also used with the POWER button to
turn on a different brand of TV (if programmed) and sets the
remote to control the TV.
VCR Turns on a compatible GE, RCA, or ProScan VCR and sets
the remote to control the VCR.

VCR Function Buttons

CHAN Up or Down Selects next higher or lower channel in
the VCR's channel memory.
CLEAR Resets time counter to 0:00:00. Allows you to change
entries when setting the clock or a timer recording.
F .ADV Lets you view one frame with each press of the button
when tape is in pause.
FWD Fast forwards the tape when the VCR is stopped. Searches
forward through a tape during playback. Starts slow motion
during play-pause and increases slow-motion speed.
GO BACK Switches between two channels. Select one channel
and then select another using the number buttons. Press GO
BACK to switch between the two channels.
INFO Shows the status displays on the TV screen.
INPUT Selects between the line input and the VCR's tuner. Line
input refers to the signal coming from the component connected
to the AUDIO/VIDEO IN jacks on the back of the VCR.
18
4
3
3
4