Cleaning The Spray Arms - Miele PFD 101 Operating Instructions Manual

Cleaning the spray arms

Particles of food can get stuck in the
spray arm jets and bearings. The spray
arms should therefore be inspected reg-
ularly (approx. every 2–4 months).

Damage due to soiling entering
the circulation system.
Without filters, soiling can enter the
circulation system and cause a
blockage.
Do not run a wash program without
the lower spray arm or without the fil-
ters.
When cleaning the filters and spray
arms, make sure that coarse soiling
cannot get into the circulation sys-
tem.
 Turn off the dishwasher.
Removing the upper and middle
spray arms
 Push the upper spray arm upwards to
engage the inner ratchet. Then un-
screw the spray arm by rotating the
screw thread counterclockwise.
Cleaning and care
 Rotate the screw thread of the middle
spray arm clockwise  (see diagram)
and remove the spray arm .
Removing the lower spray arm
 Remove the lower basket.
 Rotate the screw thread of the lower
spray arm counterclockwise  and
pull the spray arm upwards to re-
move .
63