Time Settings - Bosch VIP XD Installation And User Manual

VIP XD | Installation and User Guide

Time settings:

Select this during daylight savings time if the time change is to be taken into
account. Deactivate the check box to switch to winter time.
Time server IP address:
Enter the IP address of a time server that uses the RFC 868 protocol.
MPEG decoder
On this page, you can set the various options for the display of video images on
an analog monitor or a VGA monitor. Several presets are available for
configuration of the VGA video output signal. These presets can be adapted to
individual requirements if necessary.
Monitor name:
The monitor name is used for easy identification of the monitor location when
using VIDOS, the software for management of video surveillance systems.
Enter a unique, unambiguous name here.
Video output standard:
Warning!
Be sure to choose the correct video standard to avoid damaging the
monitor. Selecting a VGA setting with values outside the technical
specification of the monitor can result in severe damage to the monitor.
Refer to the technical documentation for the monitor you are using.
You can adapt the video output signal to the monitor you are using. As well as
the PAL and NTSC options for analog video monitors, eight pre-configured
settings for VGA monitors are also available.
Bosch Security Systems | 2005-05 | V1.0
EN | 47
Configuration using a Web Browser