Table of Contents
Advertisement
1. PURPOSE
We have to scan barcode of SONY OPU and save
barcode information into main PCB to read disc
well because this barcode includes different optimal
value according to OPU. So we have to use matched
barcode.
2. REQUIRED TO INSERT NEW BARCODE
VALUE
- After changing Traverse
- After changing Main Board Assembly.
- After changing Main Board Flash IC.
3. METHOD
There are 2 ways to save barcode information.
1) Use 2D barcode scanner. (If there is 2D barcode
scanner, use this method.)
2) Save default barcode information into USB.
4. PROCEDURE
4-1. Use 2D barcode scanner
1) Power on the set.
2) Press settings
BARCODE SCAN GUIDE
5-3
3) Under DISPLAY highlighted condition, press '5'
'1' '7' '7' '7' '7' '7' Enter on
the remote controller to display special mode.
Move to the [4]Scan Barcode and click.
4) Connect Barcode Scanner with USB port and
read barcode.
5) If barcode scan result is OK, it is shown as below.
Copyright © 2020 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Hide quick links:
Advertisement
Table of Contents
