Machine description
Display functions
The display is used to select or set the
following:
- the program
- the timer
- the
Settings
The display can show the following:
- the program stage
- the estimated time left for the pro-
gram to run
- the water consumption (EcoFeed-
back)
- any relevant fault messages and in-
formation
To save energy, the dishwasher turns
off after a few minutes if you do not
press any sensor buttons during this
time.
Touch the sensor button to turn the
dishwasher back on.
20
The OK sensor button is used to con-
firm a message or setting and also to
move to the next menu or another level.
Under Further programs/settings, a
scroll bar will appear in the right of the
display. This offers additional options.
These options can be shown using the
sensor buttons.
You can alter the dishwasher's controls
to suit changing requirements in the
Settings menu (see "Settings").
The option which is selected will have a
check next to it.
To exit a submenu again, use the
Back sensor button.
If you do not press any sensor buttons
for several seconds, the display will re-
vert to the previous menu. You will then
have to enter your settings again.