Copying data from P cards to the hard drive (continued)
Formatting the hard drive
Formatting initializes the hard drive to a format which can be used by TYPE S.
•
Bear in mind that when the hard drive is formatted, all the existing data on that drive will be erased.
1
Switch to the USB HOST mode.
Connect the USB hard drive.
Press [MENU/MODE CHK].
Using
,
and
The HDD EXPLORE screen is opened.
5
Press [MENU/MODE CHK], select "OPERATION" – "FORMAT (HDD)" using
press
.
6
Select "YES", and press
When the confirmation message appears again, select "YES", and press
The hard drive is now formatted.
When the completion message has appeared, press "OK" ( ).
0
, select "HDD" – "EXPLORE", and press
.
.
,
and
.
, and