Setting Up the Desk Stand
The desk stand can be locked into any of five positions (one folded position and four
open positions). The four open positions allow you to set the desk stand at different
viewing angles. A storage pouch is provided with the desk stand.
To set up the desk stand,
1.
Remove the desk stand from the storage pouch.
2.
Unfold the desk stand. To do so, grasp the desk stand as indicated in Figure 2-4
and squeeze to unlock the locking pins as you raise the top of the desk stand.
Grasp here
to unlock
3.
Adjust the desk stand to the desired angle. To do so, grasp the desk stand as
indicated in Figure 2-4 and squeeze to position the locking pins in the desired
locking position.
4.
Release to lock the locking pins into place.
You can now place the pen tablet or port replicator on the desk stand.
Figure 2-4. Folding Desk Stand
Top of desk stand snaps over
rubber feet when stand is folded
Rubber feet
Locking
Pins
One folded
locking position
Four open
locking positions
Port Replicator
2
2-11