GE HygroTrace User Manual page 39

September 2007
Extrapolation
Reboot
Note: The HygroTrace returns to power up, proceeds through
several initiation displays and returns to normal
operation.
34
To set coefficients A and/or B, select
Extrapolation... and press Enter.
Select the coefficient to change,
press Enter and a screen similar to
the following appears:
+
Use the arrow keys to change to the
desired value and press Enter (or
Cancel to keep the previous value).
The screen returns to the
Extrapolation menu. Press Cancel
+
twice to return to the Service Menu.
To reboot the meter and return to the
initial screen, select Reboot and
press Enter. The following screen
appears.
+
Select YES or NO and press Enter, or
press Cancel. If you select NO or
press Cancel, the unit returns to the
previous screen. If you select YES, a
reboot occurs.
+
HygroTrace Moisture Transmitter