The Ø Symbol; Setting Resolutions; Display Menu - LG BH100 Training Manual

THE Ø SYMBOL
This symbol may appear on the screen at various times after a button is pressed. This indicates that
the selected function is not available on the playing media at this time. (This is often seen whenever
a customer attempts to skip movie trailers during playback.)

SETTING RESOLUTIONS

The BH100 provides several output resolutions for HDMI and Component Video Out jacks. You can
change the resolutions using either the SETUP Menu or pressing the RESOLUTION button in Perfect
Stop mode. Note that not all resolutions are available for all connection formats.
COMPOSITE VIDEO
The composite video output can only support the 480i format video resolution.
COMPONENT VIDEO
The component (YPbPr) video output is
capable of supporting 480i, 480p, 720p, and
1080i format video resolutions. However,
since component video is an analog
connection and thus cannot support HDCP
copy-protection, 480p, 720p, and 1080i are
not available for DVD playback. Even if higher
formats are selection, the video output will
automatically output at 480i during copy-
protected DVD playback. If a BD or HD DVD
disc enables the ICT, or any other video
resolution constraint, the output resolution
for component video may differ from the
selected resolution as well.
HDMI OUT
The HDMI output supports 480p, 720p, 1080i, and 1080p format resolutions. 1080p output is only
available during playback of BD or HD DVD movies that are formatted as 1080p, DVD playback is
limited to a maximum resolution of 1080i.
NOTE: When the HDMI connection is established, EDID information is transmitted from the
Display Device to the BH100. The BH100 will automatically adjust its resolution
settings to best match the abilities of the Display Device. If a Display Device reports
via EDID data that it is incapable of displaying a resolution, the said resolution is
no longer a selectable resolution on the BH100.

DISPLAY MENU

The Display Menu allows you to adjust the BD Player to accommodate the TV it is connected to. This
menu is simply to "tell" the BD Player what type/shape TV is connected.
TV Aspect
• Select [4:3] if a 4:3 ("Square") TV is connected.
• Select [16:9] if a 16:9 (Widescreen) TV is connected.
• NOTE: 4:3 mode is only applied when the output resolution is set to either 480i or 480p.
BH100 Blu-ray Player
Setting Resolution
21
OPERATION
480i
480i (Only output for DVD)
480p (N/A for DVD)
720p (N/A for DVD)
1080i (N/A for DVD)
480p
720p
1080i
1080p (Only for BD or HD DVD)
Operation