13. ENVIRONMENTAL CONCERNS..............29 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
Page 3
ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
Follow the maximum number of 14 place settings. • If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. WARNING: Knives and other utensils with sharp •...
Page 5
ENGLISH 2.4 Use • Make sure not to cause damage to the mains plug and to the mains • Do not put flammable products or cable. Should the mains cable need to items that are wet with flammable be replaced, this must be carried out products in, near or on the appliance.
ENGLISH 3.1 Internal light The lamp goes off when you close the door or switch the appliance off. The appliance has an internal lamp. It Otherwise, it goes off automatically after comes on when you open the door or some time to save energy. switch the appliance on while the door is open.
Indicator Description Drying phase indicator. It is on when you select a programme with the drying phase. It flashes when the drying phase operates. Refer to "Programme selection". Delay Start indicator. It is on when you set the delay start. Refer to "Daily use".
Page 9
ENGLISH The option prevents rapid changes in the GlassCare dishwashing temperature of the selected programme and reduces it to 45 °C. GlassCare prevents delicate load, glassware in particular, from damaging. 5.4 Programmes overview Programme Dishwasher Degree of Programme phases EXTRAS load soil Quick...
Consumption values Water (l) Energy (kWh) Duration (min) 1) 2) Programme Quick 11.0 0.620 Pre-rinse 0.010 11.8 0.970 1h 30min 11.9 1.110 2h 40min 11.9 1.210 11.0 0.848 AUTO Sense 12.1 1.220 Machine Care 10.6 0.710 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values.
Page 11
ENGLISH Settings Values Description Latest prog. selec‐ Enable or disable the automatic selection tion OFF (default) of the most recently used programme and options. Display on floor ON (default) Activate or deactivate TimeBeam. Brightness From level 0 to lev‐ Adjust the brightness of the display. el 9 Language List of languages...
Page 12
6.2 The water softener The water softener should be adjusted according to the hardness of the water in The water softener removes minerals your area. Your local water authority can from the water supply, which would have advise you on the hardness of the water a negative effect on the washing results in your area.
Page 13
ENGLISH In case of the high water softener setting, it is possible to deactivate the dispenser it may occur also in the middle of the and the refill notification. However, for programme, before the rinse (twice best drying performance, always use during a programme).
TimeBeam displays the following CAUTION! information on the floor below the If children have access to appliance door: the appliance, we advise to • The programme duration when the deactivate AirDry. The programme begins. automatic opening of the • 0:00 and CLEAN when the door may pose a danger.
ENGLISH 7.2 How to fill the rinse aid How to fill the salt container dispenser Make sure that the ComfortLift basket is empty and locked in the raised position. 1. Turn the cap of the salt container counterclockwise and remove it. 2.
Page 16
8. Close the water tap when the programme is complete. 8.1 ComfortLift CAUTION! Do not sit on the rack or put excessive pressure on the locked basket. CAUTION! Do not exceed the max load Once the basket is unlocked, push capacity of 18 kg.
Page 17
ENGLISH 2. Press the button dedicated to the For information about the option you want to activate. detergent dosage, refer to • The light related to the button is the manufacturer's instructions on the • The display shows the updated packaging of the product.
The light related to the button is on. Press and hold for about 3 seconds. 3. Close the appliance door to start the The appliance returns to the programme countdown. selection. During the countdown, you cannot If you cancel the delay start,...
Page 19
ENGLISH For best cleaning results, arrange detergent residues on the tableware, items in the baskets as instructed in we recommend that you use tablets the user manual and do not overload with long programmes. the baskets. • Always use the correct quantity of •...
• The arrangement of the items in the • Put light items in the upper basket. baskets is correct. Make sure that the items do not move • The programme is suitable to the type freely. of load and the degree of soil.
Page 21
ENGLISH When the programme is complete, the reminder message is disabled. 10.2 Internal cleaning • Clean the appliance interior with a soft damp cloth. • Do not use abrasive products, abrasive cleaning pads, sharp tools, strong chemicals, scourer or solvents. •...
Page 22
10.6 Cleaning the lower spray We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. 1. To remove the lower spray arm, pull it upwards. 5. Make sure that there are no residues of food or soil in or around the edge of the sump.
Page 23
ENGLISH 10.7 Cleaning the upper spray We recommend to clean the upper spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. 1. Pull out the upper basket. 2. To detach the spray arm from the basket, press the spray arm upwards and simultaneously turn it clockwise.
2. Move the upper basket to the lowest 5. To install the spray arm (C) back, level to reach the spray arm more insert the mounting element (B) in easily. the spray arm and fix it in the delivery 3.
Page 25
ENGLISH Problem and alarm code Possible cause and solution The programme does not • Make sure that the appliance door is closed. start. • If the delay start is set, cancel the setting or wait for the end of the countdown. •...
Page 26
Problem and alarm code Possible cause and solution The level of water inside • Switch the appliance off and on. the appliance is too high. • Make sure that the filters are clean. The display shows iF1. • Make sure that the outlet hose is installed at the right height above the floor.
Page 27
ENGLISH Problem and alarm code Possible cause and solution The appliance switches off • Complete power outage. The wash cycle is tempora‐ during operation. rily interrupted and resumes automatically once the power is restored. Once you have checked the appliance, WARNING! deactivate and activate the appliance.
Page 28
Problem Possible cause and solution Unusual foam during wash‐ • Use the detergent designed specifically for dish‐ ing. washers. • Use a detergent from a different manufacturer. • Do not pre-rinse dishes under running water. Traces of rust on cutlery.