TH-50PH30E / TH-50PH30ER
6. Remove the Cabinet Assy.
8.15. Removal of Plasma Display
Panel
The C1,C2 Boards are connected with the plasma display
panel for the repair.
1. Disconnect the Fan Relay Connector.
2. Remove 2 screws and then remove the Fan Block.
3. Disconnect the connector (P9).
4. Remove 2 screws ( ) and then remove the AC Inlet
Block.
5. Disconnect the connectors (A8, A11, A16, A22).
6. Remove the flexible cables from the connector (D15).
7. Remove 2 screws ( ).
8. Remove 2 screws ( ) and then remove the A-Board
Block.
9. Remove 1 screw and then remove the Speaker Terminal
Block.
10. Disconnect the connector (S34).
11. Remove 2 screws (E) and then remove the S1-Board
Block.
26