GE 28821 Series User Manual page 35

Making a Call
1. Press the TALK
- OR -
Dial the number first, then press the
- OR -
Press the caller ID-volume ( 6 or 5) button to select the desired record, then
press the TALK
. When finished, press the
NOTE: You may enter up to 32 pre-dial digits.
NOTE: If you want to delete the pre-dial number you entered, press
the delete/intercom/conf
Answering Calls
1. When the phone rings, press the SPEAKER button on the handset.
- OR -
Pick up the handset and press the
. When finished, press
NOTE: Adjust the handset volume by pressing the caller ID-volume
( 6 or 5) button during a call.
Call Timer
After you press the
on the display and counts the length of time of the call in minutes and seconds.
Auto Standby
If you place the handset in the cradle while the handset is off the hook (during a call),
the call is automatically disconnected.
or SPEAKER button. Dial the desired number.
or SPEAKER button.
END/cancel
button until all of the digits are erased.
END/cancel
TALK or SPEAKER
TALK or SPEAKER button.
button to hang up.
TALK button.
to hang up.
button on the handset, the built-in call timer shows
5