Speaker System Connection - LG AR502PS Owner's Manual

Speaker System Connection

For the best surround sound, you should connect 5 speakers and/or subwoofer.
Connect the your front, center, surround speakers, and subwoofer by using the speaker wires.
Using a suitable cable, connect the SW (PRE OUT) to an input on optional powered subwoofer, as shown below.
+
-
Black
Red
Center speaker
Notes
• Turn the unit off before connecting the speakers wires.
• Be sure to match the speaker wire to the appropriate terminal on the components: + to + and – to –.
If the cables are reversed, the sound will be distorted and will lack bass.
• Be sure to use speakers with the specified impedance as shown on the rear panel of this unit.
• Do not touch the speaker terminals when the power is on. It may cause you to receive an electric shock.
Connecting speaker wire
1. 2. 3.
Passive subwoofer Front speaker (R)
Black Black
Red
Black Black
Red
Surround
speaker (R)
1. Loosen the knob by turning it counterclockwise.
2. Insert the bare part of the wire into the hole in side of each terminal.
3. Tighten the knob by turning it clockwise to secure the wire.
Front speaker (L)
Black
Red
Active subwoofer
(Not supplied)
Red
Surround
speaker (L)
Red
LINE INPUT
21