Assembly; Unpacking; Installation Requirements; Installation Position - Bosch rexroth PE 2/X Assembly Instructions Manual

7 Assembly

7.1 Unpacking


Lift the product out of its packaging.
Use a lift aid to lift the product. The positioning unit frame serves as lifting point
for, e.g., a round sling (see Fig. 5 on page 18)

Dispose of the packaging material in accordance with the applicable regulations
in your country.

7.2 Installation requirements


During installation, be sure to maintain the ambient conditions specifi ed in the
Technical Data (see page 37).
7.2.1

Installation position


Install the product level and plumb, at right angles, and axially parallel.
This ensures proper functioning and prevents premature wear.

7.3 Required tools

• Open-end wrench, SW13.
• Allen keys, sizes 3, 4, 5, 6.
• Torx keys, T30, T50
• Phillips screwdriver, PZ2
• Rubber mallet
• Level
3 842 564 350/2020-06, MIT: PE 2/X, PE 2/H, PE 4, Bosch Rexroth AG
Assembly 15/40