Configuring The Url Filter; Table 8-26 Ip Filter Parameters - Nokia ONT Product Manual

Configure a XS-2426G-A indoor ONT
Security configuration

Configuring the URL filter

2
Configure the following parameters:

Table 8-26 IP Filter parameters

Field
Enable IP Filter
Mode
Internal Client
Local IP Address
Local Subnet Mask
Remote IP Address
Remote Subnet Mask
Protocol
3
Click Save.
You can click Delete to delete a Mode, Internal Client, Protocol, Local IP Address, Local Subnet
Mask, Remote IP Address, Remote Subnet Mask, WAN Port Range and LAN Port Range.
You can click Refresh to update the displayed information.
E
ND OF STEPS
8.34 Configuring the URL filter
1
Click Security URL Filter from the left pane in the 10G PON Home Gateway page. The URL
Filter page displays.
December 2020
Issue 1
Description
Select this checkbox to enable an IP filter.
Select an IP filter mode from the list:
• Drop for upstream
• Drop for downstream
Select an internal client from the list:
• Custom settings: uses the IP address input below
• IP: uses the connecting devices' IP to the ONT
Enter the local IP address.
Enter the local subnet mask.
Enter the remote IP address.
Enter the remote subnet mask.
Select an application protocol or ALL from the list.
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA
Nokia ONT
129