Frigidaire FEQ221CAS2 Operating Instructions

*

Before Operating Your Dryer

Read your dryer Owner's Guide. It has
important safety and warranty information. It
also has many suggestions for best drying results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer Owner's
Guide before operating this appliance.

Operating Steps

Read Drying Procedures in your Owner's Guide.
It explains these operating steps in detail.
1. Prepare items for drying.
2. Check that lint screen is clean and in
place.
Printed in U.S.A.

OPERATING INSTRUCTIONS

*
3. Load the dryer. If desired, add a dryer
fabric softener sheet.
4. Close the dryer door.
5. Set Dry Temperature control.
6. Turn cycle selector clockwise to desired
setting.
7. Start dryer. Push the Start Button for 2
seconds, or turn the Turn to Start control
clockwise to "ON", hold for 1-2 seconds and
release.
8. A signal will sound at the end of the
cycle. Remove items immediately and hang
or fold.
9. Clean lint screen after every load.
Temperature Selection
Always follow directions on fabric care labels.
To avoid fire hazard, do not use
heat to dry items containing feathers or down,
foam rubber, plastics, or similarly textured, rubber-
like materials. Use Air Fluff-No Heat setting only.
The REGULAR-HIGH HEAT, PERM PRESS-
MEDIUM HEAT, and KNITS/DELICATES-LOW
HEAT temp-erature settings may be used with
any cycle setting. The AIR FLUFF-NO HEAT
setting can be used only in the Timed Dry cycle.
AIR FLUFF-NO HEAT setting tumbles the load
without heat. Use Air Fluff to freshen clothing,
pillows or blankets, or to dust draperies.
(continued, reverse side)
P/N 131929400 (0001)