Miele PWM 508 Mop Star 80 Operating And Installation Instructions page 23

Removing the transit bars
The display will remind you to remove
the transit bars.

Damage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washing ma-
chine and to adjacent furniture or ap-
pliances.
Remove the transit bars as described
in "Installation and connection".
 Confirm that the transit bars have
been removed with the OK sensor.
Continue setting up as described in the Op-
erating Instructions
play.
 Confirm the message with the
OK sensor.
appears in the dis-
Before using for the first time
Completing commissioning
To complete commissioning, the Disin-
fect cloths programme must be run
without laundry and without detergent.
If the power is interrupted prior to the
start of the first wash programme (e.g.
if the machine is switched off with the
 button), the initial commissioning
process can be completed again.
Once a wash programme has been
running for over 20 minutes, the initial
commissioning process does not have
to be performed again.
 Open the stopcocks.
 Turn the programme selector
to  Disinfect cloths.
Disinfect cloths
85 °C I 15 min

1400
 Touch the Start/Stop sensor control.
When the programme has finished, your
machine is ready for use.
1:05
h
 
23