Pioneer BDR-XD05W Operating Instructions Manual page 9

BDR-XD05_CU_En.fm 9 ページ ２０１３年８月２２日 木曜日 午前９時４２分
Connection
This is a hot-plug unit. Connect the unit to the supplied USB cable.
1 Confirm that your computer (PC) has available USB port.
2 With your Windows® or Mac® operating system running, use the supplied USB cable to connect
this unit to the PC.
Caution
• Do not disconnect the USB cable during data transfers.
• Do not disconnect the USB cable during the PC start nor any operation with the unit.
Computer
(PC)
For power source
Note
• Connection to a USB 3.0 port is recommended, since when a USB 3.0 cable is connected to a USB
2.0 port, the connection will be limited to USB 2.0 performance standards.
• This unit can operate with USB 1.1 but will not provide optimum performance.
• Connecting this unit through a USB HUB or using unspecified cables may not guarantee proper
operation.
• In some cases, the use of a single USB port may be insufficient for normal operation.
Use two USB ports for power enhancement.
• If power is insufficient when using two USB ports, connect an AC adapter (not included) through
the DC IN connector on the unit's rear panel and plug into a wall outlet to deliver power. Connect
the USB cable (included) after connecting the AC adapter for proper operation. For more details
about the AC adapter connection, visit or contact
http://www.pioneerelectronics.com/PUSA/
Phone: 1-800-872-4159
• Do not connect any AC adapter other than specified by Pioneer.
• This BD/DVD/CD WRITER is for use only with compatible UL Listed personal computers that have
Installation Instructions detailing user installation of USB accessories.
• UL Listed, Class 2 AC Adapter (Output 5 V, min. 1.0 A) shall be used.
This unit
DC IN
5V
USB 3.0 port
recommended
USB 3.0
USB cable (supplied)
9
En