Compact Disc Operation - Sharp MD-M1 Operation Manual

COMPACT DISC OPERATION

CD playback
3
4
5
1
H
2
2
1
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL TOTAL
REMAIN
Total number of tracks Total playing time
1
Press the POWER button to turn the power on.
2
Press the CD button.
3
Press the 7 CD EJECT button to open the CD
compartment.
4
Place the CD on the spindle, label side up.
5
Close the CD compartment by firmly pushing
the corner marked "PUSH CLOSE".
The total number of tracks and the total playing
time will be displayed.
6
Press the 0 6 button to start playback from track 1.
When the last track has been played back, the
PUSH CLOSE
unit will stop automatically.
To interrupt playback:
Press the 0 6 button.
"6" will appear.
Press the 0 6 button again to resume playback
from the same point.
To stop playback:
Press the
After use:
6
Press the POWER button to enter the stand-by
mode.
Caution:
Do not open the CD compartment during play-
back (or while paused).
Keep foreign objects out of the CD compartment.
Subjecting the unit to shock or vibration may
H
cause mistracking.
When the unit is not being used, be sure to close
6
the CD compartment. If it is left open, the lens
may become covered with dust and the unit may
not operate properly.
Playing certain compact discs at a high volume
may cause mistracking. In this case, listen at a
lower volume.
Flash
If TV or radio interference occurs during CD op-
eration, move the unit away from the TV or radio.
kHz REC
MHz SLEEP
13
button.