On-Screen Menu 2 (Video); On-Screen Menu 3 (Audio) - Panasonic SC-VK480 Operating Instructions Manual

Dvd stereo system
Table of Contents

Advertisement

On-Screen Menu 1 (Disc/Play)
JPG
DATE DISPLAY
DATE
ROTATION

On-Screen Menu 2 (Video)

PICTURE MODE
ZOOM
TRANSFER MODE
SOURCE SELECT
DivX
DIALOGUE ENHANCER
RE-MASTER
(continued)
Displays the photograph date
JPEG
OFF
ON
(during pause)
JPEG
To rotate the still picture
0
90
180
270
To select the picture quality for movie viewing
NORMAL: Normal images.
CINEMA1: Mellows images and enhances detail in dark scenes.
CINEMA2: Sharpens images and enhances detail in dark scenes.
DYNAMIC: Enhances the contrast for powerful images.
ANIMATION: Suitable for animation.
To select the zoom ratio
(during pause)
JPEG
NORMAL
AUTO (
DVD-V DVD-VR VCD
Zoom ratio will return to "NORMAL" while stopped, "RESUME STOP", or when the disc
tray is opened.
With COMPONENT VIDEO OUT connection
If you have set "VIDEO OUT (I/P)" to "PROGRESSIVE" ( page 23, "VIDEO" menu).
To select the method of conversion for progressive output to suit the type of
material
The setting will return to AUTO or AUTO1 when the disc tray is opened, the unit is
turned off or another source is selected.
When playing PAL discs,
AUTO: Automatically detects the film and video content, and appropriately converts it.
VIDEO: Select when using AUTO, and the content is distorted.
FILM: Select this if the edges of the film content appear jagged or rough when AUTO is
selected. However, if the video content is distorted, then select AUTO.
When playing NTSC discs,
AUTO1 (normal): Automatically detects the film and video content, and appropriately
converts it.
AUTO2: In addition to AUTO1, automatically detects film contents with different frame
rates and appropriately converts it.
VIDEO: Select when using AUTO1 and AUTO2, and the content is distorted.
When you select "AUTO" the constructing method of the DivX contents is automatically
distinguished and output. If the picture is distorted, select "INTERLACE" or
"PROGRESSIVE" depending on which constructing method was used when the contents
were recorded to disc.
AUTO, INTERLACE, PROGRESSIVE
To make the dialogue in movies easier to hear
(Dolby Digital, DTS, 3-channel or over, with the dialogue recorded in the centre
DVD-V
channel)
DivX
(Dolby Digital, 3-channel or over, with the dialogue recorded in the centre channel)
OFF
ON
To select the sound quality
The actual effect depends on the selected source.
)
X 2
X 4
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents