English VARIABLE SPEED REVERSIBLE DRILL DWD014, DWD014S, DWD014S-XE Congratulations! You have chosen a D WALT tool. Years of experience, thorough product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data DWD014...
GENERAL POWER TOOL SAFETY WARNINGS Variable Speed Reversible Drill WARNING: Read all safety warnings, instructions, DWD014, DWD014S illustrations and specifications provided with this WALT declares that these products described under “technical power tool. Failure to follow all instructions listed below data”...
English influence of drugs, alcohol or medication. A moment f ) Keep cutting tools sharp and clean. Properly of inattention while operating power tools may result in maintained cutting tools with sharp cutting edges are less serious personal injury. likely to bind and are easier to control. b ) Use personal protective equipment.
The package contains: ASSEMBLY AND ADJUSTMENTS 1 Drill WARNING: To reduce the risk of serious personal 1 Chuck key (DWD014) injury, turn tool off and disconnect tool from power 1 Instruction manualD WALT source before making any adjustments or removing/ •...
English Keyed Chuck (Fig. A–C) OPERATION DWD014 Instructions for Use The DWD014 features a keyed chuck 4 . To insert a drill bit or WARNING: Always observe the safety instructions and other accessory, follow the steps listed below. applicable regulations. 1. Open the chuck jaws by turning collar by hand and insert Proper Hand Position (Fig. G)
English CAUTION: Drill may stall if overloaded causing a sudden twist. Always expect the stall. Grip the drill firmly to control the twisting action and avoid injury. Lubrication 4. iF DRill sTAlls, it is usually because it is being Your power tool requires no additional lubrication. overloaded or improperly used.
Page 12
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be luxembourg België en luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)