Recalculating Route; Editing Route - Bosch AIVIH61L2 Manual

RECALCULATING ROUTE

A route can be manually searched again
after changing the search conditions, etc.
1. Push <MAP> and then touch [Route]
on the Launch Bar.
2. Touch [Recalculate]. A message is
displayed and the route is recalcu-
lated.
3. Touch [Start] or conduct other opera-
tions as necessary.
"Options before starting the route
guidance" (page 6-12)
INFO:
. When a waypoint has been set on the
route, the system will search for only
one route, even if route recalculation is
performed.
. When the vehicle deviates from the
suggested route, the route from the
current location to the destination is
automatically searched again by the
Auto Reroute function.
Condition:

EDITING ROUTE

1. Push <MAP> and then touch [Route]
on the Launch Bar.
2. Touch [Edit/Add to Route].
3. Edit the following settings and touch
[Calculate].
Available settings
[Add Destination]:
Touch to add a new destination.
Current destination:
Touch to edit or delete the destina-
tion.
"Editing/deleting destination or
waypoint" (page 6-20)
Criteria for calculating a route to the
destination/waypoint:
Touch to change the conditions for
route calculation.
"Changing route calculation con-
[ Edit: 2019/ 9/ 13 Model: 2020MY AIVI ST3 OM_N20E-AV1NJU0_NAVIOM19-022 ]
(125,1)
6. Navigation (if so equipped)
ditions" (page 6-20)
[Add Waypoint]:
Touch to add a waypoint.
"Setting destination or waypoint"
(page 6-19)
Current waypoint:
Touch to edit or delete the waypoint.
"Editing/deleting destination or
waypoint" (page 6-20)
[Calculate]:
After editing the route, touch to
recalculate a route with new condi-
tions.
Setting destination or waypoint
A destination or waypoint can be added to
a route that has already been set. Up to 20
waypoints besides one destination can be
set.
1. Push <MAP> and then touch [Route]
on the Launch Bar.
2. Touch [Edit/Add to Route].
3. Touch [Add Destination] or [Add Way-
point].
6-19