Maintenance of the hair dryer ���������� 11 Parts identification ������������������������������8 Troubleshooting ��������������������������������13 About nanoe™ �������������������������������������9 Specifications ������������������������������������14 How to use the hair dryer �����������������10 Thank you for purchasing this Panasonic product. Before operating this unit, please read these instructions completely and save them for future use.
Panasonic Corporation. WARNING A nanoe™ is a nano‑sized ion particle coated with water particles. Safety precautions ►Plug and Cord Do not use with the cord bundled. To reduce the risk of injury, loss of life, electric shock, fire, and - Doing so may cause fire or electric shock.
Page 5
WARNING Do not immerse the appliance in water. Do not use the appliance near water. Do not use the appliance near bathtubs, showers, Do not store the appliance in a bathroom or basins or other vessels containing water. location with high humidity. Also, do not place in a - Doing so may cause electric shock or fire.
Page 6
WARNING If the supply cord is damaged, it must be replaced by the manufacturer, its service agent (described in the warranty), or similarly qualified persons in order Disconnect the plug by holding onto it instead of to avoid a hazard. pulling on the cord.
Page 7
CAUTION Only use for drying or styling human hair or for skin. (Do not use on pets, or to dry clothing, shoes, etc.) - Doing so may cause fire or burn. ►To protect your hair During use or when unfolding or folding the handle, Do not use with the air inlet damaged.
Parts identification A Air outlet I Cord B nanoe™ outlet J Plug C nanoe™ lamp K Power switch D Air inlet 3: Turbo (Strong hot airflow) E Dual voltage switch 2: Set (Gentle hot airflow) F nanoe™ ion charge panel 1: Cool (Cool airflow) G Handle 0: Off...
About nanoe™ Ion charge Hair is negatively charged when What is nanoe™? nanoe is continuously applied. Negatively charged hair repulses nanoe™ nanoe , making it hard for nanoe nanoe™ is generated by collecting the available moisture in be applied to the hair. the air, so depending on the usage environment, nanoe™...
►Notes How to use the hair dryer • Keep a distance of over 3 cm between the air outlet and your hair. Before using the hair dryer, check the voltage • Keep the appliance at least 10 cm rating and shape of the household outlet. Then away from your hair so that hair will set the dual voltage switch in accordance with 3 cm...
Maintenance of the hair dryer Maintaining the air inlet Do this about once a month or over Always turn the power switch off and disconnect the plug from the household outlet. (Except when performing Wipe to clean lint, hair, or other maintenance on the air outlet) matter from the air inlet with a tissue or toothbrush.
Page 12
Maintaining the nanoe™ outlet Maintaining the main body At least once a month Do this when dirty In order to maintain the generation amount of nanoe™. To clean the hair dryer (when it is dirty), soak a cloth in the soapy water and squeeze it out 1.
(needle portion). The nanoe™ outlet emits a noise (crackling noise). (See page 12) If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorized by Panasonic for repair.
Specifications Product name Hair Dryer Product model EH‑NA55 120 V/240 V Power source 100 V 50‑60 Hz 110 V 60 Hz 220 V 50‑60 Hz 230 V 50‑60 Hz 50‑60 Hz Power consumption 950 W 1 100 W 1 200 W 1 300 W 1 400 W Accessory...
Page 28
規格 產品名稱 吹風機 EH‑NA55 產品型號 120 V/240 V 電源 100 V 50‑60 Hz 110 V 60 Hz 220 V 50‑60 Hz 230 V 50‑60 Hz 50‑60 Hz 950 W 1 100 W 1 200 W 1 300 W 1 400 W 消耗電量...