Cleaning and care
Cleaning the drawer front and
glass lid
Remove soiling and fingerprints with
a standard domestic glass cleaner or
with a clean, damp microfibre cloth.
After cleaning, wipe the surfaces dry
using a soft cloth.
Cleaning the vacuum chamber
and sealing bar
Damage caused by liquids.
Liquid getting into the vacuum pump
air intake valve can result in damage
to the vacuum pump.
Take care that liquids do not get into
the air intake valve.
Tip: To make cleaning easier, the
sealing bar can be lifted off.
Remove light soiling immediately
using a solution of hot water and
washing-up liquid applied with a
clean sponge or use a clean, damp
microfibre cloth.
Remove any residual cleaning agent
with a little clean water.
After cleaning, wipe the surfaces dry
using a soft cloth.
32
Cleaning the vacuum adapter
Clean the vacuum adapter with a
clean sponge and a solution of hot
water and washing-up liquid or a
clean, damp microfibre cloth.
Then dry the vacuum adapter with a
cloth.
Do not use the vacuum adapter again
until it is completely dry.
Cleaning the vacuum sealing
bag support
Clean the vacuum sealing bag
support with a clean sponge cloth,
washing-up liquid and warm water or
with a clean, damp microfibre cloth.
Then dry the vacuum sealing bag
support using a cloth.
Do not use the vacuum sealing bag
support again until it is completely
dry.