Connect the Printer Connect the printer to your computer using either a USB cable or parallel cable. Don’t connect both cables; you only need one or the other. Follow the instructions in the appropriate section below.
You must install both cartridges or the printer won’t work. Unpack the ink cartridges that came with your printer and remove the yellow tape. Tilt each cartridge toward you as you lower it. Make sure the tabs rest on the hooks.
Then follow the right set of instructions for your system. Windows 95, 98, Me, and 2000 Your computer may have the EPSON printer software already installed. Make sure the printer is turned on, then turn on your computer. If you see this message Your software is already installed.