Also, crimping should be double-sided; using single-sided crimping may cause the printer to jam. For multi-part forms joined with spot-gluing, be sure the spots of glue are spaced the same way on the left and right edges of the paper.
Page 3
MTBF: 8000 power-on hours (25% duty) Running the printer continuously for extended periods of time is not recommended. It can cause the printer to wear out sooner than expected. Print head life: 300 million characters at 14 dots per character...
(3621ý');ðèíííò 6HWWLQJýWKHý',3ý6ZLWFKHV This section describes the functions of the DIP switches. After setting one or more DIP switches, turn on the printer to put your settings into effect. 6:ýQRï )XQFWLRQ ìðì (PXODWLRQýPRGH ,%0ýPRGHó ìðë 'UDIWýVSHHG 1RUPDO ìðê &KDUDFWHUýTXDOLW\ ìðé 6HHýEHORZýIRUý,%0ýPRGH ìðè...
Page 5
7HVWLQJýWKHý3ULQWHU You can use the built-in self-test to make sure the printer is working correctly. The self-test checks the following: Control circuit Printer mechanism Print quality Before performing the self-test, you need to load paper.
The DFX-5000+ printer is very easy to set up, but because it is a very high-speed machine, take special care to ensure that a proper paper path is established. EPSON printer stand model 8502 is specially designed to accommodate the printer, and its use is recommended but not required.
Page 7
MX series EPSON Note: To use 15 or 20 characters per inch on your printer, you need a DFX-5000+ printer driver. If your software program does not list this printer, contact the software manufacturer to see if an update is available.