Table of Contents
Advertisement
56/81
Bosch Rexroth AG
Maintenance and Installation
8.5.3
BIOS Settings
PCI slot
8.6
Exchanging the Fuses
IRQ0 to IRQ6, IRQ8 to IRQ13 and IRQ15 are already assigned and
are not available for PCI and ISA extension cards anymore!
In the BIOS submenu "PnP/PCI Configurations", each PCI slot can be assigned
to an IRQ address. By specifying the IRQ address the priority is specified at the
same time.
If only PnP 1) cards are used, the "AUTO" setting is to be kept.
Several fuses are integrated in the VPB 40.1 devices. The two following figures
show their position. If a fuse has to be replaced, the new fuse must have the
values specified in
fig. 8-13 "Fuses" on page
certified.
DANGER
●
Before you open the control cabinet PC VPB 40.1 to replace a fuse, dis‐
connect it from the power supply (230 V or 24 V)!
●
Also disconnect the external batteries, before you open the VPB 40.1 .
WARNING
Comply with all ESD-protection measures during replacing a fuse! Avoid elec‐
trostatic discharges!
PnP card = Plug-and-Play card
1)
DOK-SUPPL*-VPB*40.1***-PR02-EN-P
Rexroth IndraControl VPB 40.1 Control Cabinet PC
58. Furthermore, it must be UL-
Lethal electric shock by live parts with more
than 50 V! Risk to damage the device due to
short-circuits!
Risk to damage the operator terminal by elec‐
trostatic discharges!
Advertisement
Table of Contents
