SHARP SERVICE MANUAL AUTOMATIC RICE COOKER MODEL KSH-777/T In the interests of user-safety (Required by safety regulation in some countries) the set should be restore to its original condition and only parts identical to those specified should be used. TABLE OF CONTENTS Page NAME OF PARTS AND SPECIFICATIONS ..............
“WARM” Indicator Lamp “COOK” Indicator Lamp Upper Lid Inner Pot Handle Outer Pot Panel Power Cord Assembly Switch Ass’y SPECIFICATIONS Model KSH-777/T Voltage (V) Rated frequency (Hz) Rice cooking 1,350 Power consumption Warming 82.5 . or 5.5 kg Rice cooking capacity 2.53 .
CAUTIONS FOR USE 1. Keep clean the brim and bottom of inner pot, heater plate at all times to avoid sticking cooked rice, uncooked rice grains, dust and dirt. Cooking performance may be made worse by such sticking rice grain and the like.
METHOD OF OPERATION Different degree of temperature at various parts of the cooker during its operation. HEATER PLATE HEATING PLATE INNER POT 100 C THERMOSTAT RICE TEMPERATURE THERMOSTAT CUTS OFF TIME 30 MINUTES After being switch “ON” the operation will be started by generating heat from the heater plate and spread through the bottom of inner pot.
ADJUSTMENT OF SWITCH LEVER AND CONTACTS 1. Turn over the outer pot with inner pot inside, disclose its bottom lid. Push switch cook, adjust switch lever and switch angle. Bottom lid Outer pot Switch cook Inner pot A. Thermostat rod must not be drew up by switch lever. It should be moving left and right easily. SW.
INSPECTION AFTER REPAIRING 1. Switch cook should be at the center of panel. 2. Ensure that there is no any contaminants, deposits, stains exist on heater plate, thermostat and outside bottom of inner pot. 3. Firmly put inner pot inside the cooker, move inner pot right and left to ensure it can be closely contact with outer pot.
PROBLEMS AND SOLUTIONS Problems Possible Causes Solution Check . Incompletely cooked 1. Inner pot improperly 1. Adjust or replace. Boil about 2000 cc. of rice. with heater plate. water. Check the state 2. Failure in setting inner pot. 2. Adjust. of bubbles at the bottom 3.
SERVICE PARTS LIST PARTS CODE REF. NO DESCRIPTION Q'TY PRICE (FEC) PRINTING & PACKAGING MATERIAL 1K508 * INSTRUCTION BOOK 1K6038 CARTON BOX KSH-777 1K603T ** CARTON BOX KSH-777T 1K5062 MEASURING CUP 1K6051 BOTTOM PAD 1K609 UPPER PAD MECHANICAL PARTS 1K1031ASY UPPER LID ASS'Y 2-1-1 1K103...