LG MULTI V WATER MINI Engineering Manual page 55

Wiring for the Variable Water Flow Control Kit Valve
Figure 29: Variable Water Flow Control Kit Wiring.
• The Variable Water Flow Control Kit can control a maximum of two valves. If only one valve is present, then the sub signal connector must
not be used.
• AWG 23 wiring is recommended for the power (AC 12V) line and signal (DC 0~10V) line.
WATER CIRCUIT INSTALLATION
Variable Water Flow Control Kit (Required Accessory)
AC 24V Power
Source for Variable
Water Flow Valve
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Sub Main
DC 0~10V Control
Signal for Variable
Water Flow Valve
WATER CIRCUIT | 55