Sharp FACSIMILE User Manual page 110

Making Telephone Calls
Searching for an auto-dial
number
You can use the SEARCH/R key to
search for a Rapid Key or Speed Dial
number. First search for the number
as described in Searching for an
auto-dial number on page 92, then
pick up the handset or press the
SPEAKER key. The number will be
dialed automatically (do not press the
START key).
Redial
The last number dialed can be
redialed by pressing the REDIAL key
(it is not necessary to pick up the
handset or press the SPEAKER key).
When the other party answers, pick
up the handset to talk.
PBX operations
If your fax is connected to a PBX, you
can use it to perform the following
operations:
Making enquiry calls: During a call,
you can put the other party on hold,
make a further call to a third party,
and then go back to your original
caller.
Transferring calls: You can transfer
a call to another number on the same
PBX without operator assistance.
Note: Make sure that the correct PBX
settings have been selected as
explained in PBX Settings in Chapter
1.
108
Making enquiry calls
1
During the telephone conversation,
press the SEARCH/R key. This
puts the other party on hold.
SEARCH
2
When you hear the dial tone, dial
the number of the third party for the
enquiry call.
ABC
1
JKL
GHI
4
PQRS TUV
7
3
When you have finished the
enquiry call, you will be
automatically returned to the
original caller as soon as the third
party hangs up.
R
DEF
2 3
MNO
6
5
WXYZ
8 9