Charge your headset Talk Time Headset battery status Connect to PC Subscribe USB adapter again Configure USB adapter Load software Update your Poly device The basics Headset Controls Power on/off Make, answer, end calls Adjust volume Mute Interact with Microsoft softphone...
DECT Enhanced Poly is a member of the DECT Forum and has fully adopted their recommendations for enhancements to security within all DECT products. Security Poly DECT-based products now fully incorporate the latest recommendations on Enhanced Security from the DECT Forum and ETSI.
Overview Headset Basics Volume wheel Headset LED Call button/Press to interact with Power button Microsoft Teams (app required) Mute ANC (Active Noise Canceling) Be safe Please read the safety guide for important safety, charging, battery and regulatory information before using your new headset. DECT USB adapter NOTE USB connection may vary but function is the same...
NOTE For true stereo listening when wearing the boom on the left, adjust the wearing preference setting in Poly Lens Desktop App. Charge your headset Place the headset in the charge cradle. The headset charging LED flashes when charging the headset and turns off when the headset is fully charged.
USB adapter flashes blue. When not on a call the LED is solid blue. NOTE Also configurable in Poly Lens Desktop App. Typically, your DECT USB adapter is subscribed (connected) to your headset. In the event that Subscribe USB adapter...
The Savi system ships with the over-the-air headset subscription enabled. In a multi-shift environment, you may want to disable this mode of subscription. Manage settings in Poly Lens Desktop App. Your DECT USB adapter comes ready to take calls. If you want to listen to music, you will Configure USB adapter need to configure your DECT USB adapter.
Load software Customize your device behavior through advanced settings and options with Poly Lens Desktop App. Some softphones require the installation of Poly software to enable device call control (answer/end and mute) functionality. Download: poly.com/lens. NOTE Device settings are also available in Plantronics Hub Desktop App.
• For Microsoft Teams, tap the headset's Call button to interact (Teams desktop softphone application required). • For Skype for Business, press and hold the headset's Call button for 2 seconds to interact (Skype for Business desktop application required). • Set your target phone in Poly Lens Desktop App.
The primary user will hear "Conference requested." To accept the request, press the primary user's headset Call button. Both users hear "Conference accepted." View conference call status by going to Poly Lens Desktop App. Exit a conference call Guest headsets can remain as guests through multiple calls. To remove a guest headset, either press the guest headset's Call button or dock the primary user's headset in the charge cradle.
More Features Change the voice prompt language on your headset in Poly Lens Desktop App. Change voice prompt language Optimize audio quality There are 3 audio modes: wideband stereo (hybrid), wideband (conversation) and multimedia (music). To optimize your audio quality for your activity, with the system idle, press the headset Mute button for 4 seconds.
For a list of compatible softphones, visit poly.com/software. If the Poly Lens Desktop App is not installed and you do not have a compatible softphone, you must first press the headset Call button and then use the softphone interface to place/answer/end calls.
Page 14
Set your target phone by going to Poly Lens Desktop App When you configure another softphone, the Call button: • doesn't interact with Teams • doesn't go to Teams notifications •...
What's in the box Contents may vary by product. DECT USB adapter (USB-A or USB-C, Headset design varies) Charge stand Power supply and plug adapters USB cable Carrying case Quick start guide...