LG STB-6500 Installation Manual page 30

30
Radio Name Display
(Depending on model)
• Instead of "Audio Only", the name of a radio programme is displayed on the screen when a radio broadcast is playing.
• If the setting is "On", the name of a radio programme is displayed for the radio programme.
• If the setting is "Off", the text "Audio Only" is displayed for the radio programme.
Teletext
(Depending on model)
• If set to On, the teletext mode stays enabled even when the programme signal disappears on the teletext screen.
• If set to Auto, the teletext mode is disabled when the programme signal disappears on the teletext screen.
15Min Auto Off
• When set to 'Enable' , STB will turn off if there is no signal in 15Min.
DVB-C
(Depending on model)
• DVB-T/C programmes are searchable and selectable if DVB-C is "Enable".
DVB-C Bandwidth
(Depending on model)
• If country is 'Philippines' , 'DVB-C Bandwidth' menu will be shown.
• Select the bandwidth of cable tuning (6 MHz/8 MHz). The default is 6 MHz.
Auto Sensing
• If set to 'On' , the input is automatically switched when the input signal that you set to "ON' is received.
• If set to 'Disable' , the input is not switched when the input signal is received.
- SIMPLINK and Auto Sensing cannot work simultaneously. If SIMPLINK is set to On, Auto Sensing is automatically set to Disable.
- If the signal is removed while Auto Sensing (automatic input switch) is enabled, the input returns to the previous setting.
If the several input are connected by enabling Auto Sensing and the automatic input returns to the previous setting.
If the several inputs are connected by enabling Auto Sensing and the automatic input switch is performed several times, the input
returns to the previous setting only for the last input and does not repeat the operation for the rest.