Tips For Saving Energy - Bosch 40815356 User Manual

Aligning the appliance
The appliance has an adjustable threaded foot on the
front left side. The appliance should be situated in a
secure and level position. Use the adjustable threaded
foot to align the appliance.
Make sure that the appliance is situated in a precisely
level position.

Tips for saving energy

If you follow the instructions below, your appliance will use less power.
Note: The arrangement of the features does not affect the energy consumption of the appliance.
Installing the appliance
Keep the appliance out of direct sunlight.
Install the appliance as far away as possible from heating elements,
cooker and other heat sources:
3 cm to electric or gas cookers.
30 cm to an oil or solid-fuel cooker.
Note: If this is not possible, attach an insulating plate between the ap-
pliance and heat source.
Select an installation location at a room temperature of approx.
20 °C.
Maintain a distance of at least 30 cm from walls and other appli-
ances.
Caution!
Risk of burns!
Individual parts of the appliance become hot during operation. Touch-
ing these parts may result in burns.
Do not cover or block the ventilation openings.
Ventilate the room daily.
Using the appliance
Open the appliance door only briefly.
Transport purchased food in a cool bag and place quickly in the
appliance.
Allow warm food and drinks to cool down before placing in the appli-
ance.
Thaw frozen food in the refrigerator compartment in order to utilise
the low temperature of the frozen food.
Always leave a space between the food and the rear panel.
Pack food airtight.
Vacuum the back of the appliance once a year.
Do not cover or block the ventilation openings.
--------
The appliance must cool less frequently at low ambient tempera-
tures and therefore consumes less power.
The air on the rear panel of the appliance does not warm up so
intensely. The appliance consumes less power if the warm air can
escape.
The air in the appliance does not warm up so intensely. The appli-
ance must cool less frequently and therefore consumes less power.
The air can circulate and the air humidity will remain constant. The
appliance must cool less frequently and therefore consumes less
power.
The air on the rear panel of the appliance does not warm up so
intensely. The appliance consumes less power if the warm air can
escape.
Installation and connection en
5