Panasonic KX-HN3051C Operating Instructions Manual page 30

Useful Information
Battery recharge
Problem
The monitor unit beeps
and is displayed.
The battery is not fully
charged.
Charge only mode
The charge only mode is the dedicated mode to charge the battery of the baby monitor. Do not
use this mode if it is unnecessary because all functions except the baby monitor's battery charge
are disabled with this mode.
n To activate the charge only mode:
1
Press M N (power) for about 2 seconds until the baby monitor shuts down.
2
Connect the charger to the baby monitor. After the LED indicator on the top of the baby
monitor illuminates in amber color for about 30 seconds, the LED indicator turns off
automatically. Then the baby monitor goes into charge-only mode.
n To deactivate the charge only mode:
– Press M N (power) for about 2 seconds until the LCD display of the baby monitor illuminates.
For assistance, visit www.panasonic.ca/english/support
30
HN3051C̲(en̲en)̲0228̲ver.040.pdf 30
Cause & Solution
R Battery charge is low. Fully charge the battery (page 14).
R The temperature for the charging conditions is too low or too
high. Charge the battery within the specified charging condition
range (page 31).
R The battery may not be installed. Install the battery (page 14).
R The battery may be deteriorated. Please visit
www.panasonic.ca/english/support
2018/02/28 16:25:29