Dell U4320Q Quick Start Manual

1 Disassembly Procedures:
Remove 4pcs carton locks, then use a proper tool to
S1
open the carton, then uplift and remove the top
paper box carefully.
Remove the top cushion foam with all accessories
including QSG, Delta-e paper, user's manual, DP
S2
cable, HDMI cable, Type-C cable, USB cable, power
cable and other packing materials.(Note: It depends
on whether users returning the accessories)
Take out the base and stand from bottom cushion
S3
foam, then take out the packed monitor from the
bottom cushion foam.
base
Take out the monitor from EPE-bag and put the LCD
S4
monitor on a protective cushion.
QSG
Delta-E
power cable
Type-C cable
HDMI cable
DP cable
USB cable
monitor
stand
Use a Philips-head screwdriver to remove 4pcs
S5
screws for unlocking mechanisms.
(No.1~4 screw size=M6x12; Torque=9
2
4
Wedge your fingers between the rear cover and the
middle bezel on the corners of the top side of the
monitor to release the rear cover, then use one hand
S6
to press the middle bezel, the other hand to pull up
carefully the rear cover in order of arrow preference
for unlocking mechanisms of rear cover.
2
Lift the rear cover up carefully. Disconnect the USB
LVDS cable and function key cable from the
S7
connectors of the interface board, and then remove
the rear cover.
DELL U4320Q
Go to contents page
0.5kgfxcm)
±
3
1
3
4
1
1