Adjusting the Reel Drive Belt (continued)
Traction and Reel Drive Systems: Adjustments
4. Adjust belt (2) tension as follows:
A. Loosen the bolt (4) and rotate the idler arm (3) to release the tension
on the reel drive belt (2).
B. Pivot the idler arm (3) clockwise against the backside of the belt and
apply a torque 3.9 to 4.5 N∙m (35 to 40 in-lb) to internal hex socket on
the idler arm (3) and tighten the nut of carriage bolt (4). Check the belt
tension as per para 3.
C. Ensure that the reel drive gasket (5) is in position and install the reel drive
cover (6) to the reel drive assembly (1) and secure with the 4 socket
head screws (7).
D. Torque tighten the socket head screws to 1.7 to 4.5 N∙m (15 to 40 in-lb).
Use an alternation pattern and torque tighten the socket head screws to
9.6 to 10.7 N∙m (85 to 95 in-lb).
5. Connect the battery pack; refer to
(page
5–3).
Connecting the Lithium Battery Pack
Page 4–4
Greensmaster
®
eFlex 1021
20248SL Rev A