Advertisement
•
Determine the installation location for the bathroom hardware.
•
Drill 1/4" diameter hole approximate 1-1/8" apart. Place plastic anchors
screws (B) into the drilled holes using hammer to tap it in flush with the
wall. Place the mounting plate (A) and secure them to the wall with the
help of mounting screws.
•
For 7MT030 & 7MT031 Install the mounting plate (A) 24-5/16" & 18-
5/16" apart respectively.
•
Secure the bathroom hardware with the screw at the bottom. Do not
overtighten.
For more care information or trouble shooting inquiries about your
Pioneer Product, please see the contact information on the back page.
Bath Accessories Installation
3
REV-11 19, 12
Advertisement
