Table of Contents
Advertisement
5. Remove the screw that secures the power button to the front bezel. Then, remove the power button
from the front bezel.
Figure 12. Removing the power button
6. Position the new power button so that the screw hole in the power button is aligned with the
corresponding hole in the front bezel. Then install the screw to secure the power button to the front bezel.
Figure 13. Installing the power button
7. Connect the power button cable to the power button connector on the system board. See "Parts on
the system board" on page 5.
8. Reinstall the front bezel. See "Front bezel" on page 59.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 87.
60
ThinkStation P410 User Guide
Advertisement
Table of Contents
