Table of Contents
Advertisement
4
en | Safety
1
Safety
Caution!
Indicates a hazardous situation which, if not avoided, could result in minor or moderate
!
injury.
Notice!
Indicates a situation which, if not avoided, could result in damage to the equipment or
environment, or data loss.
1.1
Safety precautions
Caution!
The Low Voltage power supply unit must comply with EN/UL 60950. The power supply must
!
be a SELV-LPS unit or a SELV - Class 2 unit (Safety Extra Low Voltage - Limited Power
Source).
Caution!
Installation should only be performed by qualified service personnel in accordance with the
!
National Electrical Code (NEC 800 CEC Section 60) or applicable local codes.
Read, follow, and retain for future reference all of the following safety instructions. Follow all
warnings before operating the device.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Protect all connection cables from possible damage, particularly at connection points.
11. Connect the yellow/green earth wire of the camera to the system earth of the installation
03.2019 | V2.0 | AM18-Q0711
Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners.
Do not install device near any heat sources such as radiators, heaters, stoves, or other
equipment (including amplifiers) that produce heat.
Never spill liquid of any kind on the device.
Take precautions to protect the device from power and lightning surges.
Adjust only those controls specified in the operating instructions.
Operate the device only from the type of power source indicated on the label.
Unless qualified, do not attempt to service a damaged device yourself. Refer all servicing
to qualified service personnel.
Install in accordance with the manufacturer's instructions in accordance with applicable
local codes.
Use only attachments/accessories specified by the manufacturer.
to ensure correct safety and EMC/RFI protection.
Installation manual
FLEXIDOME IP starlight 6000 VR
Bosch Security Systems B.V.
Advertisement
Table of Contents
