Panasonic TH-50PH30E Operating Instructions Manual page 13

Remote Control Transmitter
ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect.
Standby (ON / OFF) button
The Plasma Display must first be
plugged into the wall outlet and turned
on at the power switch (see page 9).
Press this button to turn the Plasma
Display On, from Standby mode. Press
it again to turn the Plasma Display Off
to Standby mode.
POS./SIZE button
PICTURE button
Sound mute On / Off
Press this button to mute the
sound.
Press again to reactivate sound.
Sound is also reactivated when
power is turned off or volume level
is changed.
N button
POSITION buttons
INPUT button
Press to select Input signal
sequentially. (see page 11)
Basic Controls
OFF TIMER button
The Plasma Display can be preset to switch to
stand-by after a fi xed period. The setting changes
to 30 minutes, 60 minutes, 90 minutes and 0
minutes (off timer cancelled) each time the button
is pressed.
30 min 60 min
0 min (Cancel)
When three minutes remain, "Off timer 3 min"
will fl ash.
The off timer is cancelled if a power interruption
occurs.
AUTO SETUP button
Automatically adjusts the position/
size of the screen.
SET UP button
SOUND button
Volume Adjustment
Press the Volume Up "+" or Down "–"
button to increase or decrease the
sound volume level.
R button (see page 14)
Press the R button to return to
previous menu screen.
RECALL button
Press the "RECALL" button to display
the current system status.
Input label
1
Aspect mode
2
Audio input
NANODRIFT Saver operating
Off timer
3
The off timer indicator is
displayed only when the off
timer has been set.
Digital Zoom
90 min
P C 1
4:3
2
COMPONENT
NANODRIFT
Off timer 90min 3
13